NUX B-3 Wireless Microphone System for Dynamic Microphone Snap-On Solution for Cameras, Mixers, Amps, Audio Interfaces 2.4GHz License Free, Rechargeable Wireless Kit for Vocalists and Videographers
- 2.4GHz wireless microphone system designed for those who want to enjoy their favorite wired microphone as wireless.
- Rechargeable battery. The audio quality is 32-bit 48 kHz
- Quickly and easily connects to the mic and input XLR jacks
- with a hot shoe mic adapter and female XLR to 3.5mm phone jack cable which easily attaches to your camera for wireless recording.
- The distance range limit is 100-feet outdoor and the latency is less than 4 milliseconds.
A solidly 2.4G Hz wireless snap-on microphone system designed for those who want to get rid of the cables and enjoy the wireless world without any complicated set up.
A rechargeable battery powered system that quickly and easily connects to the mic and input xlr jacks. No wires at all and no costly batteries required as it is fully USB rechargeable.
3 steps and less than 30s, it will be ready to go:
Step 1. Turn on the transmitter and the receiver. 5 seconds
Step 2. Snap on the transmitter to your Microphone and the receiver to your amplifier, mixer, or recorder. 5 seconds
Step 3. Pairing up and sound check. 20 seconds.
Channel 1 is the default paring channel if you want to use different channels for any reason, just press the channel switch on both the transmitter and the receiver to make sure both units are in the same channel. Wait till you see the RF Status LED turns blue.
It’s Constructive for videographers and live streamers
B-3 comes with a hot shoe mic adapter and female XLR to 3.5mm phone jack cable which easily attaches to your camera for wireless recording.