SE Electronics X1-S-STUDIO-BUNDLE X1 S Microphone with Reflection Filter X, Shockmount and Cable Pack

by SE Electronics
$ 249.99

The SE Electronics X1 S Studio Bundle is a large-diaphragm condenser microphone and accessory package designed for vocal and instrument recording in project studios, home setups, mobile rigs, and commercial facilities. It includes the X1 S cardioid studio condenser mic, an RF-X reflection filter, a pop filter, shockmount, and a 10’ microphone cable.

The metal-bodied X1 S features a handcrafted gold-sputtered capsule, 20 Hz to 20 kHz frequency response, and a selectable 80 or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 or -20 dB pad minimizes distortion when miking loud sources. The mic can handle a maximum SPL of 140 dB (160 dB with the -20 dB pad engaged). It utilizes a gold-plated XLR 3-pin jack and requires 48 VDC phantom power. The included accessories aid in eliminating unwanted sounds from plosives, room reflections, and vibration.

sE Electronics X1 S Large-Diaphragm Cardioid Condenser Microphone

The SE Electronics X1 S is a large-diaphragm cardioid condenser microphone designed for versatile, full-range vocal and instrument recording in commercial facilities, project studios, home setups, and mobile rigs. The handcrafted gold-sputtered capsule features a pressure-gradient design for directional focus and rejection of off-axis sounds. It utilizes a gold-plated XLR 3-pin jack and requires 48V phantom power.

The metal-bodied X1 S delivers a 20 Hz to 20 kHz frequency response and a selectable 80 Hz or 160 Hz low-cut filter to reduce rumble and low-frequency buildup. A switchable -10 dB or -20 dB pad minimizes distortion when miking loud sources such as drums and amplified guitars. Even without a pad, the X1 S can handle a maximum SPL of 140 dB. It ships with a mic clip and thread adapter for easy mounting on a mic stand.

  • The X1 S utilizes a handcrafted condenser capsule, meticulously constructed and tuned in SE's capsule room by technicians with decades of experience
  • Its internal redesign allows for improved sensitivity, dramatically increased SPL handling (up to 160 dB), and a large reduction in self-noise
  • The -10 dB and -20 dB pad switches provide an extended dynamic range, enabling a wide range of applications and close-mic techniques
  • Selectable at either 80 Hz or 160 Hz, the two filters help eliminate low-frequency rumble or footfall noise, as well as help compensate for excessive bass (proximity effect) with close-mic techniques
  • The X1 S's all-metal chassis provides efficient rejection of electrical interference and noise
  • A gold-plated XLR connector ensures loss-free, reliable signal connection

sE Electronics RF-X Reflection Filter

The RF-X Reflection Filter from sE Electronics prevents unwanted audio ambiance from contaminating your vocal tracks in untreated acoustic environments. This acoustic filter uses the same patented technology as the RF-Pro. Its lightweight body and clamp assembly make the RF-X simple and easy to use.

The RF-X is lighter than its predecessors but still maintains durability. It features a four-layer acoustic filter design comprising the outer composite panel itself, a wool fabric layer, an air gap layer, and an inner acoustic foam layer. The air gap ensures that recordings exhibit almost no sound coloration when the RF-X filter is used.

The RF-X clamp assembly's lightweight design can be used on almost any microphone stand. It allows vertical mounting only, making it ideal for vocal recording.

sE Electronics Isolation Pack - Shock Mount and Pop Filter for Magneto, X1 & sE 2200a II Series

The sE Electronics Isolation Pack is a quick-release shock mount that is designed specifically for the Magneto, X1 Series (sE X1, X1 Vocal Pack, and X1 Studio Bundle) and sE 2200a II series (sE2200a II MP and sE2200a II C) of microphones. It can be used by professionals and amateurs alike to capture vocals free of pops caused by vocal plosives and low-end rumble and noise caused by unwanted vibrations.

Pop shield features metal as opposed to a fabric shield for durability.

You recently viewed

Clear recently viewed